Which cameras work with Monitoreal

Monitoreal AI Video Surveillance Assistant has great compatibility with all major camera brands.
Using ONVIF, we can auto-detect not only the most globally known brands, but also those less known.
Monitoreal also supports non-ONVIF IP cameras, as well as many analogue models.
Check out our guide of a selection of the camera models that have been successfully tested with our ecosystem.

Camera encoding settings:
Streaming codec: H.264
Streaming resolution: from 640×480 up to 1920×1080
Snapshot resolution: from 640×480 up to 3840×2160

All of Hikvision IP models should work. Most Hikvision cameras come with ONVIF disabled. To make them discoverable, log into the camera interface, add the Administrator account as an ONVIF account and enable it. See full instructions for connecting Hikvision cameras in the attachment below.
Analogue camera compatibility relies on DVR ability of delivering RTSP.
Below you can see some specific models which are tested successfully with Monitoreal.

Connecting Hikvision Cameras to Monitoreal.pdf

  • IP
    Hikvision Dome Camera DS-2CD1323G0E-I
    Hikvision Desktop Camera DS-2CD2421G0-IW
    Hikvision Bullet Camera DS-2CD1023G0E-I
    Hikvision Wi-Fi Dome DS-2CD2141G1-IDW1
    Hikvision DS-2CD2343G0-I
    Hikvision DS-2CD2643G0-IZS
    Hikvision Outdoor Bullet: DS-2CD2043G0-I
    Hikvision Outdoor Bullet: DS-2CD2045FWD-I
    Hikvision 4MP Bullet: DS-2CD2047G2-LU
    Hikvision 4MP Dome: DS-2CD2143G0-I
    Hikvision 3MP Dome: DS-2CD2135FWD-I
    Hikvision 6MP Turret: DS-2CD2365G1-I

Below you can see some specific models which are tested successfully with Monitoreal.

Manual Set Up Analogue Hikvision.pdf

  • Analogue
    Hikvision DVR : DS-7208HUHI-K1 (supported both RTSP & Snapshot mode on all channels)
    Hikvision 2MP Dome: DS-2CE57D3T-VPITF
    Hikvision 2MP Turret: ECT-T12F2
    Hikvision 2MP Turret: DS-2CE76D3T-ITMF
    Hikvision 2MP Mini Bullet: DS-2CE16D3T-I3

All of Dahua IP models should work. Onvif models should be detected automatically or can be added manually.
Analogue camera compatibility relies on DVR ability of delivering RTSP.
Below you can see some specific models which are tested successfully with Monitoreal.

  • IP
    Dahua Wi-Fi Bullet IPC-HFW1235S-W-0280B
    Dahua 2MP Wi-Fi Bullet: IPC-HFW1235S-W-S2
    Dahua 2MP WDR IR Bullet: IPC-HFW5231E-Z
    Dahua 8MP WDR IR Bullet: IPC-HFW5831E-ZE

  • Analogue
    Dahua DVR: XVR5108C-X  (tested on Channel one & supported both RTSP & Snapshot mode, most possible to work on all channels)

Manual Set Up Analogue Dahua.pdf

All of Uniview IP models should work. Onvif models should be detected automatically or can be added manually.
Analogue camera compatibility relies on DVR ability of delivering RTSP.
Below you can see some specific models which are tested successfully with Monitoreal.

  • IP
    Uniview Bullet Camera IPC2122LR3-PF40M-D
    Uniview 2MP Bullet: IPC2122LB-ADF28KM-G
    Uniview 4MP Bullet: IPC2124LE-ADF40KM-G

All of Tiandy IP models should work. Onvif models should be detected automatically or can be added manually.
Analogue camera compatibility relies on DVR ability of delivering RTSP.

  • IP
    Tiandy Dome Camera TC-C32HP
    Tiandy Bullet Camera TC-C32WP

All of Kedacom IP models should work. Onvif models should be detected automatically or can be added manually.
Analogue camera compatibility relies on DVR ability of delivering RTSP.
Below you can see some specific models which are tested successfully with Monitoreal.

  • IP
    Kedacom Bullet Camera IPC2252-HNB-SIR50

All of Mobotix IP models should work. Onvif models should be detected automatically or can be added manually.
Analogue camera compatibility relies on DVR ability of delivering RTSP.
Below you can see some specific models which are tested successfully with Monitoreal.

  • IP
    Mobotix MX-c25-N016-AUD

All Amcrest IP models should connect automatically or can be added manually.
Below you can see some specific models which are tested successfully with Monitoreal.

  • ‎Amcrest Outdoor Turret: IP5M-T1179EW-28MM
    Amcrest Outdoor Bullet: IP8M-2496EW-V2

TIP: To remove logo from image – type in IP Address, Log in, Go to “Camera” on left hand side menu – click on “overlay”, go to “logo overlay” and disable.

All GeoVision IP models should connect automatically or can be added manually.
Below you can see some specific models which are tested successfully with Monitoreal.

  • Geovision IR Eyeball IP Dome: GV-EBD-4700-0F
    Geovision Outdoor IP Dome: GV-TVD4711

All Axis IP models should connect automatically or can be added manually.
Please note: The ONVIF account and credentials on your camera needs to be the same as the Administrator level account on that camera. Additionally, if the camera is not detected automatically, you will need to enable ONVIF by following the process outlined below:

  1. Log in to the camera
  2. Access the “Plain Config” screen
  3. Under “webservices” -> uncheck the box under “Discovery Mode” -> then hit “save”

Below you can see some specific models which are tested successfully with Monitoreal.

  • Axis 3MP Mini Dome: M4206-LV
    Axis 1080P Mini Dome: M3075-V
    Axis 4MP Bullet: M2026-LE-MkII
    Axis 720P PTZ Mini Dome: M5014

All SV3C IP models should connect automatically or can be added manually.
Below you can see some specific models which are tested successfully with Monitoreal.

  • SV3C 3MP Bullet: SV-B060POE-3MPL-A

All Digital Watchdog IP models should connect automatically or can be added manually.
Below you can see some specific models which are tested successfully with Monitoreal.

  • Digital Watchdog 2.1MP Bullet: DWC-MB62DiVT